Finished

In the meantime I had the chance to finish the Kettenkrad and the figures in almost one go, with some relaxing weeks of holidays in between. So this is now the result:

The figures where finished and painted using Vallejo acrylics and some oil washes. The Krad was heavily weathered, starting with sponge chipping and some hand painted chips, using oil washes and a lot of dirt, consisting of oils, plaster and white spirit.

For the base, I discovered that artists’ acrylic paste mixed with plaster and acryilc color makes some very good mud, and I also applied this mixture to the Krad and the trailer. The puddles of still water were added using Vallejo Still Water.

The load of the trailer is from the spare box, and consists of jerry cans, blanket, and bags.

Now this project is finished, it was very demanding due to the sculpture of four figures and the amount of changes required for the Kettenkrad, but I also had a lot of fun and I am quite happy with the result (and my somewhat improving sculpting skills)…

Advertisements

The first two figures are finished

In the meantime I finished the first two figures that will be sitting on the bench in the back of the Kettenkrad:

With the third figure, that will sit on top of the other two, I am currently working on the coat. I just realized that the belt is sitting way to high up, so there will be some corrections to be made. Work on the fourth figure (sitting in the trailer) has just started:

Further work on the Kettenkrad riders

Based on my experience from scultping the PaK crew, I think that is really important to shape the body proportions accurately. Doing so, sculpting the clothing is much easier, as there is no need to correct the shape of the body, and full attention can be paid to get the clothing right.

I also noticed that it is so much easier to sculpt clothing from putty that has already started to cure. It is less sticky, holds the shapes much better and there is almost no danger of leaving fingerprints on items made from rolled out putty when applying them to the figure.

Bearing these findings in mind, I continued to work on the two soldiers that will sit on the back seat of the Kettenkrad. The pictures show them at a stage where the trousers are shaped, and the lower parts of the coats are also put into place. You can also see the much more defined upper parts of the body.

Kettenkrad riders

The Kettenkrad scene features four soldiers sitting on the back of the Krad, and on the trailer. These figures will be sculpted next. For the driver figure, I plan to use the converted driver from the Kettenkrad kit.

I start again with the armatures from brass wire, this time soldering the wires also together. Then I add some Milliput and the boots. The two figures that will be seated the lowest on the Krad have already been formed into their poses, with some Milliput used to stabilize the legs. The last pictures show how the two guys will be seated.